Revision	Release Date	Weld Set
17	09/23/2022	Z204302
•	Raised minimum flow rate measurement, and discard first few readings at flow start.
•	Fixed Cutlinc NRT disconnection issue introduced in previous revision.
16	8/18/2022	Z204302
•	Fixed issue with some boards not connecting via Ethernet.
15	7/8/2022	Z204302
•	Changed High Coolant flow trip threshold to 100 GPM to effectively disable it.
14	2/14/2022	Z204302
•	Changed Flow error startup delay to 2 seconds in param file.
13	6/11/2021	Z204302
•	Changed flow with pump off fault delay attribute ee saved and not set by param file.
Revision	Release Date	Weld Set
12	4/9/2021	Z204302
•	Fixed Issue with over pressure fault not shutting off output.
Revision	Release Date	Weld Set
11	3/25/2021	Z204302
•	Increased delay at turn off for flow without pump on to 2500 ms
•	Fixed error reporting over nrt of new faults
Revision	Release Date	Weld Set
8	8/20/2020	Z204302
•	Changed the default flow trip limit to 0.75 GPM.
o	Also changed the param file to set this value on any previously programed boards during system update.
•	Fixed a bug with the flow sensor that could cause high readings when there was close to zero flow.
•	Added a mac address message to cutlinc RT. 
o	This message gets sent out during discovery on cutlinc NRT so the gas console will know which power supply is connected via CAN when multiple systems are present.
Revision	Release Date	Weld Set
7	4/29/2020	Z204302
•	Filter NRT temperature and flow meter reading.
•	Set trigger off when flow is lost.
Revision	Release Date	Weld Set
6	3/12/2020	Z204302
•	Fix height control voltage feedback for RT CAN
•	Notify NRT when gas selection changes at power supply because of fault.
Revision	Release Date	Weld Set
5	2/10/2020	Z194317
•	Fix current meter attribute inaccuracy at certain values.
Revision	Release Date	Weld Set
4	1/6/2020	Z194317
•	Fix Current Scaling and Filtering sent over RT CAN.
Revision	Release Date	Weld Set
3	12/11/2019	Z194317
•	Activate fan relay on water temp thermal fault.
Revision	Release Date	Weld Set
2	11/12/2019	Z194317
•	Initial Production Release.

