Revision	Release Date	Weld Set
10	09/23/2022	Z204302
•	Raised minimum flow rate measurement, and discard first few readings at flow start.
•	Fixed Cutlinc NRT disconnection issue introduced in previous revision.
9	08/18/2022	Z204302
•	Fixed issue with some boards not connecting via Ethernet.
8	7/12/2022	Z204302
•	Changed High Coolant flow trip threshold to 100 GPM to effectively disable it.
7	02/14/2021	Z204302
•	Changed Flow error startup delay to 2 seconds in param file.
6	06/11/2021	Z204302
•	Changed flow with pump off fault delay attribute ee saved and not set by param file.
Revision	Release Date	Weld Set
5	04/9/2021	Z204302
•	Fixed issue with gas mux overpressure not turning off the output.
Revision	Release Date	Weld Set
4	03/25/2021	Z204302
•	Increased delay at turn off for flow without pump on to 2500 ms.
•	Fixed error reporting over nrt of new faults.
Revision	Release Date	Weld Set
2	8/20/2020	Z204302
•	Add Cutlinc ID’s for discovery
•	Added a mac address message to cutlinc RT. 
o	This message gets sent out during discovery on cutlinc NRT so the gas console will know which power supply is connected via CAN when multiple systems are present.
•	Add high flow rate error and flow with pump off error.
Revision	Release Date	Weld Set
1	06/18/2020	Z204302
•	Initial Production Release.
